Using Foam Core Board For The Layout Sections
I constructed this micro layout from foam core sheets. The sheet size is 20 inches x 30 inches and I chose black foam core sheets (About 3 sheets total used for all sections). I used a construction method I received from a PowerPoint presentation by Prof. Klyzlr* on a past episode of Model Rail Radio. One slide illustrates Chris Ellis’ method of using flat modules connected with foam core clips (Clipboard Modules). Some really nice illustrations by Jack Trollope, which were included in Prof. Klyzlr’s presentation*, aided me in putting this all together. I modified the dimensions to fit my needs and used Pacer Industries Formula 560 Canopy Glue to fasten the parts together. The left section’s dimensions are 7.5 inches wide by 30 inches long with a box depth of 40mm. The right section is 7.5 inches wide by 24 inches long with a box depth of 40mm as well. The left staging section (not pictured) is 2 inches wide by 13.5 inches long with a box depth of 40mm. The right staging section (not pictured) is 3.5 inches wide by 28 inches long with a box depth of 40mm.
Below are photos of the main modules under construction.
The clip is really good at holding the two sections together. So far, I am not experiencing any warping. That may change with the addition of scenery.
Up Next in Part 3: Laying Track and Getting Wired.
*Due to copyright, I am not able to post Prof. Klyzlr’s PowerPoint presentation, “Foamcore Modules: A Different Approach to Layout Construction.”